Mission Updates

TOKYO, Japan — Six years after making history by returning pristine surface samples from the carbonaceous asteroid Ryugu, Japan’s veteran deep-space explorer Hayabusa2 has successfully pulled off a high-stakes, high-velocity encounter.

The Japan Aerospace Exploration Agency (JAXA) confirmed that on July 5, 2026, at exactly 6:30 p.m. Japan Standard Time (JST), the spacecraft rocketed past the near-Earth asteroid 98943 Torifune (formerly known as 2001 CC21).

Ground tracking stations verified the health of the vehicle shortly after the intercept, confirming it emerged completely unscathed. JAXA has officially released the first optical and thermal infrared images of the rock, marking a triumphant start to the probe’s ambitious Hayabusa2 Extended Mission.

2014: Launch
2020: Ryugu Sample Return
July 5, 2026: Torifune Intercept
2031: 1998 KY26 Rendezvous

The Tricky Physics of an 18,000 km/h Precision Intercept

Unlike its primary campaign at Ryugu; where Hayabusa2 spent 18 months hovering at low speeds, the Torifune intercept was an extreme test of autonomous guidance and navigation. The spacecraft whipped past the asteroid at a blistering relative speed of 5.3 kilometers per second (nearly 18,000 km/h), coming within an astonishingly tight distance of just 1 to 10 kilometers from the space rock.

Because the probe was originally engineered for slow, low-speed rendezvous operations, its orientation loops had to remain completely fixed during the brief encounter window. To prevent the asteroid from blurring into a streak across the camera sensors, mission planners used an automated hybrid optical-radio navigation sequence to track the target.

The onboard Optical Navigation Camera–Telescopic (ONC-T) first picked up Torifune as a distant dot on June 20, using those tracking points to constantly tweak the spacecraft’s trajectory ahead of the July 5 flyby.

First Scientific Telemetry Transmitted to Earth

Data collection began in earnest roughly one hour prior to closest approach, utilizing the probe’s remote-sensing payload.Due to the extreme speed of the pass, instruments were unable to pivot back toward Torifune once the spacecraft zipped past, leaving a razor-thin window to lock down scientific telemetry.

JAXA has started downlinking the data payload, releasing initial datasets from two primary instruments:

TIR (Thermal InfraRed Imager): Gathered critical data at 6:29:58 p.m. JST from a distance of approximately 10 kilometers. The TIR maps surface temperature fluctuations, helping scientists calculate the rock’s thermal inertia and roughness.

ONC-T (Optical Navigation Camera–Telescopic): Successfully captured high-resolution framing images of the asteroid at 6:29:59 p.m. JST, giving scientists their first structural view of the asteroid’s surface features.

Hayabusa2 Extended Mission Sensor Manifest

To collect this vital scientific data during its brief, high-speed window, Hayabusa2 relied on an array of advanced remote-sensing instruments.

The Optical Navigation Camera–Telescopic (ONC-T). Featuring a $6.35^\circ \times 6.35^\circ$ field of view and a $1024 \times 1024$ pixel resolution sensor, the ONC-T served a dual purpose: it captured the high-resolution astronomical photographs used to study Torifune’s surface features while simultaneously generating the critical optical navigation data required to guide the spacecraft during its approach.

Complementing the optical imagery was the Thermal InfraRed Imager (TIR), which operated with a $16^\circ \times 12^\circ$ field of view and a pixel count of $328 \times 248$. By observing the asteroid at wavelengths between $8 \text{ to } 12\,\mu\text{m}$, the TIR map measured Torifune’s surface temperature variations, thermal inertia, and localized surface roughness, allowing scientists to understand the structural density of the asteroid’s topsoil.

As the spacecraft closed the distance, two additional instruments active-mapped the asteroid’s physical properties. The Near-Infrared Spectrometer (NIRS3) utilized a narrow $0.1^\circ$ field of view to analyze light across a wavelength spectrum of $1.8 \text{ to } 3.2\,\mu\text{m}$. With a wavelength resolution of $20\text{ nm}$, the NIRS3 investigated the asteroid’s mineral composition, looking specifically for the telltale signatures of water or hydroxyl groups ($-\text{OH}$).

Simultaneously, the Light Detection and Ranging (LIDAR) system fired a pulsed YAG laser at a wavelength of $1.064\,\mu\text{m}$ to measure the exact distance between the spacecraft and Torifune. Capable of tracking distances ranging from as far out as $25\text{ km}$ down to a mere $30\text{ meters}$, the LIDAR provided the definitive spatial telemetry needed to contextualize all other scientific observations.

Driving the Data Line: Planetary Defense Insights

Telescopic observations from Earth have long suggested that Torifune is an elongated S-type (silicate-rich) asteroid, stretching roughly 450 meters across. Early analysis of the downlinked data suggests the asteroid may actually be a contact binary; an object created when two smaller space rocks gently drifted together and merged under their own microgravity.

Because S-type asteroids are composed of dense stony materials like pyroxene and olivine, they behave completely differently under structural impacts than darker, porous, carbon-rich C-type bodies like Ryugu. Understanding the physical layout of these rocks is a high priority for international Planetary Defense efforts.

The ultra-close autonomous tracking techniques validated by Hayabusa2 during this flyby provide space agencies with a functional blueprint for rapid reconnaissance missions—the exact type of mission that would be launched to inspect a newly discovered hazardous asteroid on a collision course with Earth.

“The technology required for this flyby can directly contribute to the development of countermeasures against an Earth collision.”

– JAXA Project Statement

The Road to 2031: A Fast-Rotating Target

With the Torifune flyby successfully checked off, ground controllers are preparing for a long, quiet cruise phase. The spacecraft still has a healthy reserve of xenon propellant fueling its ultra-efficient ion engines.

The probe will execute two precision Earth gravity assists in 2027 and 2028 to reshape its orbit. These slingshot maneuvers will set up the final goal of the extended mission: a July 2031 rendezvous with 1998 KY26. 

Measuring a mere 30 feet (11 meters) across, this tiny rock spins completely on its axis once every 10 minutes, making it one of the smallest and fastest-rotating celestial bodies ever targeted for exploration.